Test Bench

Product Details:

Additional Information:

• Item Code: UTB-Elevated
• Port of Dispatch: Chennai

Product Details:

• The bench top panel is constructed with 19 mm thick chip board suitably laminated

• The front plates are fixed with top and bottom profile run throughout the panel length
• The Front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes and weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outs for easy frontaloperations.
• For others like switch, socket, MCB, etc. are mounted or fixed by fixtures as required with making suitable cut outs for easy frontal operations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identifications and troubleshooting in the future

• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. Normally, PVC or Nylon hoses are used according to the withstanding rated pressure 
• Back of the panel are made up of 19mm chip board with inserted perforated mild steel ventilator arrangement with hinge and lock with key
• The back doors are easily openable for cleaning and fault finding or any other service requirements 
• Size: 1500 x 450 x 680 mm (LBH)

• Trolley Type

• Under bench cabinet is made up of chip board suitably laminated & fascia
• Storage space with lockable drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items/tools and tackle, etc

• Size: 420 x 460 x 685 mm (LBH)

• Main power supply residual current circuit breaker (for operators
• Safety)
• Miniature CircuitBreaker
• (For protection of built-in instruments and Power
• Supplies)
• Emergency off
• Power OnLamp
• 5 meters extension cable with plug to connect the
• Work bench

Product Details:

• The bench top panel is constructed with 19 mm thick chip board suitably laminated

• The front plates are fixed with top and bottom profile run throughout the panel length
• The Front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes and weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outs for easy frontaloperations.
• For others like switch, socket, MCB, etc. are mounted or fixed by fixtures as required with making suitable cut outs for easy frontal operations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identifications and troubleshooting in the future

• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. Normally, PVC or Nylon hoses are used according to the withstanding rated pressure 
• Back of the panel are made up of 19mm chip board with inserted perforated mild steel ventilator arrangement with hinge and lock with key
• The back doors are easily openable for cleaning and fault finding or any other service requirements 
• Size: 1500 x 450 x 680 mm (LBH)

• Trolley Type

• Under bench cabinet is made up of chip board suitably laminated & fascia
• Storage space with lockable drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items/tools and tackle, etc

• Size: 420 x 460 x 685 mm (LBH)

• Main power supply residual current circuit breaker (for operators
• Safety)
• Miniature CircuitBreaker
• (For protection of built-in instruments and Power
• Supplies)
• Emergency off
• Power OnLamp
• 5 meters extension cable with plug to connect the
• Work bench

Additional Information:

• Item Code: ETB-Non-Elevated
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Chennai

Product Details:

• The bench top panel is constructed with 19 mm thick chip board suitably laminated

• The front plates are fixed with top and bottom profile run throughout the panel length
• The Front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes and weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outs for easy frontaloperations.
• For others like switch, socket, MCB, etc. are mounted or fixed by fixtures as required with making suitable cut outs for easy frontal operations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identifications and troubleshooting in the future

• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. Normally, PVC or Nylon hoses are used according to the withstanding rated pressure 
• Back of the panel are made up of 19mm chip board with inserted perforated mild steel ventilator arrangement with hinge and lock with key
• The back doors are easily openable for cleaning and fault finding or any other service requirements 
• Size: 1500 x 450 x 680 mm (LBH)

• Trolley Type

• Under bench cabinet is made up of chip board suitably laminated & fascia
• Storage space with lockable drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items/tools and tackle, etc

• Size: 420 x 460 x 685 mm (LBH)

• Main power supply residual current circuit breaker (for operators
• Safety)
• Miniature CircuitBreaker
• (For protection of built-in instruments and Power
• Supplies)
• Emergency off
• Power OnLamp
• 5 meters extension cable with plug to connect the
• Work bench

Product Details:

• Trolley Type

• Under bench cabinet is made up of chip board suitably laminated and fascia
• Storage space with lockable drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items / tools and tackle, etc

• Size: 420 x 460 x 685 mm (LBH)

Product Details:

• The bench top panel is constructed with 19 mm thick chip board suitably laminated

• The front plates are fixed with top and bottom profile run throughout the panel length
• The Front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes & weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outs for easy frontaloperations
• For others like switch, socket, MCB, etc., are mounted or fixed by fixtures as required with making suitable cut outs for easy frontal operations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identifications and troubleshooting in the future
• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. Normally, PVC or Nylon hoses are used according to the withstanding rated pressure 
• Back of the panel are made up of 19 mm chip board with inserted perforatedmild steel ventilator arrangement with hinge and lock withkey
• The back doors are easily openable for cleaning and fault finding or any other service requirements

• Size: 2250 x 450 x 340 mm (LBH)

Product Details:

• The bench top panel is constructed with 19 mm thick chip board suitably laminated

• The front plates are fixed with top and bottom profile run throughout the panel length
• The Front plates are made up of 3 mm high quality aluminium cut sheets pasted with 0.3 mm aluminium printed sticker with names, indication, cutouts, etc
• All the instruments of different sizes and weights are duly mounted in the panel with good mounting base plates, fixtures as required with suitable cut outs for easy frontaloperations.
• For others like switch, socket, MCB, etc. are mounted or fixed by fixtures as required with making suitable cut outs for easy frontal operations
• The electrical wiring is done as per the standard practice by using quality wires, crimping legs and proper ferruling for easy identifications and troubleshooting in the future

• The pneumatic tubing is made by using PVC or Nylon hose or Copper or SS material depending upon the pressure rating. Normally, PVC or Nylon hoses are used according to the withstanding rated pressure 
• Back of the panel are made up of 19mm chip board with inserted perforated mild steel ventilator arrangement with hinge and lock with key
• The back doors are easily openable for cleaning and fault finding or any other service requirements 
• Size: 1500 x 450 x 680 mm (LBH)

• Trolley Type

• Under bench cabinet is made up of chip board suitably laminated & fascia
• Storage space with lockable drawers - 2 nos., cupboard - 1 no. for keeping necessary stationary items/tools and tackle, etc

• Size: 420 x 460 x 685 mm (LBH)

• Main power supply residual current circuit breaker (for operators
• Safety)
• Miniature CircuitBreaker
• (For protection of built-in instruments and Power
• Supplies)
• Emergency off
• Power OnLamp
• 5 meters extension cable with plug to connect the
• Work bench